|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Bonding in the automotive industry
Krejčí, Adam ; Hanáčková, Pavla (referee) ; Kubíček, Jaroslav (advisor)
The thesis presents a literature study of adhesive bonding technology. The work deals with the advantages and disadvantages of adhesive bonding, design of adhesive joints, technological processes of adhesive bonding and the division of adhesives. The thesis also discusses various materials used for the construction of car bodywork and their properties. The main focus of the work is on the use of adhesive bonding in the car industry, comparing traditional and modern technology used for the construction of bus bodywork. In the experimental part of the thesis, the aim is to reveal the influence of surface treatment on the resulting shear strength when employing metal to metal bonding.
|
|
|
Gluing of FDM 3d printed parts from PLA
Šlimar, Filip ; Slaný, Martin (referee) ; Zemčík, Oskar (advisor)
The thesis deals with the theory of 3D printing, materials for printing and bonding. It focuses on FDM printing and PLA material. It also compares gluing with other methods and deals with the distribution of adhesives, the gluing procedure and tests of glued joints. The work, based on literature studies, proposes an experiment to evaluate selected adhesives. The practical part contains a description, results and evaluation of the experiment. The evaluation of adhesives is based on tensile and shear strength.
|
|
|
Development of wood-based board materials applying thermal modification process
Buriánek, Vlastimil ; Pipíška,, Tomáš (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals deals with the effectiveness of polyurethane and phenol-resorcinol-formaldehyde adhesives when applied in bonded joints of thermally treated sheet materials. The thermal resistance of commercially used adhesives was analysed as part of a research activity. Furthermore, the changes in the properties of wood materials after heat treatment were described. In the practical part, the effectiveness of the used adhesives on densified birch plywood was verified with respect to the shear strength of the resulting composite. Based on the results obtained, it was proceeded to verify the effectiveness of densification on spruce plywood.
|
|
|
The study of adhesion of glued balistic composites on the dependence of materials used.
Dobiáš, Jiří ; Másilko, Jiří (referee) ; Šiler, Pavel (advisor)
The aim of this work was to investigate the properties of bonded ballistic materialsBalistic composites are mainly glued to reduce weight while keeping their protective properties. On this basis, the materials used were ballistic steel, ceramics, rubber kevlar, non-gummed kevlar, Dyneema and fiberglass. For bonding used were a one-component adhesive Collano 36.104 and two-component adhesive Biresin U1305. The strength of the joint was measured in shear at tensile loads. From these results, deformation energy was further calculated.
|
|
|
Experimental comparison of shear properties of FRP measured by ASTM methods
Ponížil, Tomáš ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
Přesné určení konstitutivních smykových závislostí napětí na deformacích je základem pro pochopení chování anizotropního kompozitního materiálu. Bylo vyvinuto mnoho zkoušek smykových vlastností kompozitních materiálu. Jelikož vyvolání čisté smykové napjatosti je složité, tento stav je vyvolán pouze některými z nich. V této práci je ověřeno použití systému Aramis k vyhodnocení průběhu smykového přetvoření a následnému výpočtu konstitutivních smykových vlastností při provedení jednoduché zkoušky ohybem krátkého nosníku. Tyto výsledky jsou dále porovnány se zkouškou podle Nicolae Iosipesca.
|
|
|
Machanical testing of solder joints
Drab, Tomáš ; Šandera, Josef (referee) ; Szendiuch, Ivan (advisor)
The project contains theoretical research of electrotechnical manufacture for lead-free reflow soldering. It contains characterization of soldering processes. Includes variations of solder paste printing, principles of part placing and also reflow soldering process. The project appoints possibilities of testing solder joints strength, mainly focused on mechanical vibrations. It describes a design and preparation of solder joint strength test methods by mechanical vibrations. It compares influence of vibrations on part types and solder alloys.
|
|
|
New directions for waterproofing of underground transport
Čech, Tomáš ; Čížek, Luboš (referee) ; Šťastník, Stanislav (advisor)
This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.
|
|
|
Evaluation of load-deformation characteristics of glued timber using DIC analysis
Šot, Michal ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
The work deals with issues of evaluation of the shear properties of timber structural materials, particularly CLT elements. The work contains an overview of extensive research so far presented scientific studies dealing with the characteristic shear properties of wood. In the practical part was carried out the experiment dealing with the failure mode of transverse lamellae of CLT elements that were exposed to shear stress. There were observed individual effects that this may affect the material properties. In the first part of the experiment were performed numerical models using FEM. In the second part, the test specimens were tested in three point bending. Here, attention was paid to the influence of macroscopic properties of wood on the distribution of stress cracks and shear strength, the tests were recorded using DIC system.
|
|
| |
guest ::
